Fenders

Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender R1/R2 fender set. They utilize a unique quick-release mounting system that makes installation a snap and they're made from tough, but light polycarbonate with stainless steel struts for stiffness and durability. And, they accommodate tires up to 700 x 25c in size.

Topeak's DeFender XC1/XC11 Set offers durable rain and mud protection for your 26-inch wheeled bike. They're incredibly light and easy-to-use, too. Extra clearance makes the XC1 perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachments allows them to be installed and removed in seconds. The rear uses a quick-release seatpost attachment and the angle is adjustable for the perfect fit.

Our Gunk-Guard keeps the crap out of your face so you can focus on your lines instead. The larger than standard profile stops more sh#t flinging off your front wheel and all over the place (270 mm long x 290 mm wide). Suits all bikes and forks, except lefty's... It's not gonna work on one of those.

Our Gunk-Guard keeps the crap out of your face so you can focus on your lines instead. The larger than standard profile stops more sh#t flinging off your front wheel and all over the place (270 mm long x 290 mm wide). Suits all bikes and forks, except lefty's... It's not gonna work on one of those.

Our Gunk-Guard keeps the crap out of your face so you can focus on your lines instead. The larger than standard profile stops more sh#t flinging off your front wheel and all over the place (270 mm long x 290 mm wide). Suits all bikes and forks, except lefty's... It's not gonna work on one of those.

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

- A universal, quick-mount rear mudguard, that fits all seatpost diameters (25 to 32mm) - Quick and easy to install - Tool-free - Reflective safety stickers - Shock-resistant polymer - 100% recyclable material

- Fits tubes from Ø27 to 35mm - Fits 26" to 28" wheels - Two width options: 51mm and 46mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

Features - Compatible with common wheel and tire sizes - Helps keep the back side of suspension fork bridges clean - Multi-color Giant logo sticker pack included

- Unique softer PP material helps prevent cracks in extreme temperatures - UV resistance for increased durability. - Proprietary bracket design helps keep fender stable on the bike - Front model fits most down-tubes - Rear model offers adjustable angle

Giant's Speedshield Tour fenders are a simple, lightweight way to fend off muck and grime. The clip-on, quick release attachment system is fast and secure. When it starts to rain, snap them on, and when the sun starts to shine they come off just as easily. High-strength plastic gives years of reliable service.

- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation

- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation - Extra long mudflaps provide ultimate coverage

- Technopolymer construction - Durable and weatherproof material - Fits most forks - Zip ties included

Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces

Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Note: The Roadrunner AR - Road fender fits 700c wheels up to a width of 28mm Weight: 548 g / 1.21 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays - Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

- Made of resistant plastic - Fits all frames - Blade width: from 50 to 70mm

- Z+fal Croozer/Swan Road Fender Set Width 45mm For 700 Wheels

- Made of Polypropylene - Downtube installation - Elastomeric straps - 60 to 80 mm blade width - Weight: 62g

- Compatible with 26’’, 27.5’’ and 29’’ forks - 3.1'' wide, enough for most MTBs - 360mm length offers good mud protection - Made of techno-polymer resin - Fixation on the front fork with 7 zip-ties or 4 Velcro - 3 sets of stickers included to customize to your taste - Weight: 110 g

- Light, discrete and durable polypropylene mudguard for Fat and Plus size bikes - Universal mount, fits rigid and suspension forks - 286 x 300mm - 48g

- Deflector FM60 front and RM60 rear mudguard set - Easy, tool-less mounting systems - RM60 mounts on seatposts and is compatible with 26'' and 27.5'' wheels - FM60 mounts inside steer tube and is compatible with 26'' to 29'' wheels - Width: 60mm to 72mm

- Made of Polypropylene with dual material spoiler - Seat post adjustable clamp - Fit seat post Ø 25 – 32 mm - 47 to 60 mm blade width - Reflective strip - Weight: 125g

- Designed for 26'', 27.5'' & 29'' Mtn bikes - Easy to install and fit perfectly on your bike - Made of ultra-resistant techno polymer resin - Mounts onto 25 to 32 mm seat posts - Weight: 220 g

- Seatpost-mounted MTB mudguard - MD-TURN System: Quick screw-on mounting system, fits 25 to 32mm seatpost diameter - Double orientation for optimal tire coverage - Over-moulded flap offers the best protection and makes the mud guard more flexible - Reflective ring providing your bike with greater visibility - Material: Fibre-glass reinforced polypropylene - Wheel diameter: 27.5'' / 29'' - Max tire width recommended: 3.0" - Weight: 238 g